FSC4-5 Solar submersible pump

Solar-powered water pumps use the sun to generate power and efficiently move water from a well, storage tank, pond or other water sources to the desired location. They work well for irrigation, livestock, bird baths, and off-grid applications, and are an excellent alternative to traditional water pumps.

Profile:

Adopt stainless steel screw and rubber stator, permanent Magnet Brushless motor. With MPPT controller, the max efficiency is over 85%, raises 25% than the traditional AC pump.

2. Material:

1) Stainless steel casing, shaft core, coupling and pump body; copper alloy connecting, base; rubber stator of high-strength and wear-resistant.

2) Oil immersion style stainless steel submersible motor.

Product Feature:

1) Compact structure, high-lift, noiseless, pollution-free; complete electrical protecting controller device, against under-voltage, over-voltage, over-flow, overload, waterless etc; automatic recovery; controlling water height as demand.

2) Easy installation, maintenance-free, safe and reliable.

Application:

These electric pumps series are workable within maximum head, as there are no restrictions of BDC. With the addition of high head, high efficiency and wide high efficiency zone, they are suitable for distance water irrigation, high efficiency of increasing oxygen on aquaculture, pumping water from deep well, gardening, fountain and etc.

Working condition:

1) Non-corrosive water; the volume ratio of sand content no more than 1‰ particle size less than 0.2mm.

2) Max medium temperature up to +40℃ ; PH value remains 6.5-8.5.

3) Work close to the rated head and must be immersed in water.

Model	solar array voltage (V)	solar array power (W)	Best input voltage(DC)	Max Flow (M3/H)	Max Head (M)	Outlet (IN)	Open circuit voltage (VOC)
Model	solar array voltage (V)	solar array power (W)	Best input voltage(DC)	Max Flow (M3/H)	Max Head (M)	Outlet (IN)	Open circuit voltage (VOC)
FSC4-5.0-92-D72/850-AD	108	1275	90-120	4.5	92	1.25"	<150V
FSC4-6.5-75-D72/750-AD	108	1125	90-120	6.5	75	1.25"	<150V
FSC4-9-65-D72/750-AD	108	1125	90-120	9	65	1.5"	<150V
FSC4-13-65-D72/900-AD	108	1350	90-120	11	65	2"	<150V
FSC4-15-45-D72/900-AD	108	1350	90-120	15	45	2"	<150V
FSC4-5.0-148-D110/1300-AD	144	1950	110-150	4.5	148	1.25"	<200V
FSC4-6.5-112-D110/1100-AD	144	1650	110-150	6.5	112	1.25"	<200V
FSC4-9-96-D110/1100-AD	144	1650	110-150	9	96	1.5"	<200V
FSC4-15-60-D110/1100-AD	144	1650	110-150	15	60	2"	<200V
FSC4-18-51-D110/1100-AD	144	1650	110-150	18	51	2"	<200V
FSC4-5-160-D110/1500-AD	144	2250	110-150	4.5	160	1.25"	<200V
FSC4-6.5-126-D110/1500-AD	144	2250	110-150	6.5	126	1.25"	<200V
FSC4-10-108-D110/1500-AD	144	2250	110-150	10	108	1.5"	<200V
FSC4-15-72-D110/1500-AD	144	2250	110-150	16	66	2"	<200V
FSC4-20-52-D110/1500-AD	144	2250	110-150	20	52	2"	<200V
FSC4-5-214-D180/1800-AD	288	2700	180-324	4.5	214	1.25"	<400V
FSC4-6.5-158-D180/1800-AD	288	2700	180-324	6.5	158	1.25"	<400V
FSC4-10-135-D180/1800-AD	288	2700	180-324	10	135	1.5"	<400V
FSC4-14-92-D180/1800-AD	288	2700	180-324	16	81	2"	<400V

Solar pumps are specifically designed to accept DC power directly from the solar modules and are optimized for operating under less-than-ideal sun conditions. Where conventional AC-powered pumps require a stable voltage and frequency to operate, solar pumps can operate over a wide range of voltage and available current.

Conventional AC-powered pumps require large amounts of power to move large volumes of water in a short period of time. Solar pumps typically move a smaller volume of water over an extended period of time. This method requires far less power, which minimizes the size and cost of the PV array.

There are several methods for pumping water in remote areas, such as windmills, g

PREVIOUS：IQ50-140B (N6) NEXT：SQB2.2 Booster Pump